Members

acceleration :Phaser.Point

The acceleration is the rate of change of the velocity. Measured in pixels per second squared.

Source - physics/arcade/Body.js, line 141

allowGravity :boolean

Allow this Body to be influenced by gravity? Either world or local.

Default Value:

• true

Source - physics/arcade/Body.js, line 152

allowRotation :boolean

Allow this Body to be rotated? (via angularVelocity, etc)

Default Value:

• true

Source - physics/arcade/Body.js, line 59

<readonly> angle :number

The angle of the Body in radians, as calculated by its angularVelocity.

Source - physics/arcade/Body.js, line 209

angularAcceleration :number

The angular acceleration is the rate of change of the angular velocity. Measured in radians per second squared.

Source - physics/arcade/Body.js, line 185

angularDrag :number

The drag applied during the rotation of the Body.

Source - physics/arcade/Body.js, line 191

angularVelocity :number

The angular velocity controls the rotation speed of the Body. It is measured in radians per second.

Source - physics/arcade/Body.js, line 179

blocked :object

This object is populated with boolean values when the Body collides with the World bounds or a Tile. For example if blocked.up is true then the Body cannot move up. An object containing on which faces this Body is blocked from moving, if any.

Source - physics/arcade/Body.js, line 303

<readonly> bottom :number

The bottom value of this Body (same as Body.y + Body.height)

Source - physics/arcade/Body.js, line 781

bounce :Phaser.Point

The elasticity of the Body when colliding. bounce.x/y = 1 means full rebound, bounce.x/y = 0.5 means 50% rebound velocity.

Source - physics/arcade/Body.js, line 162

<readonly> center :Phaser.Point

The center coordinate of the Physics Body.

Source - physics/arcade/Body.js, line 120

checkCollision :object

Set the checkCollision properties to control which directions collision is processed for this Body. For example checkCollision.up = false means it won't collide when the collision happened while moving up. An object containing allowed collision.

Source - physics/arcade/Body.js, line 283

collideWorldBounds :boolean

A Body can be set to collide against the World bounds automatically and rebound back into the World if this is set to true. Otherwise it will leave the World. Should the Body collide with the World bounds?

Source - physics/arcade/Body.js, line 276

customSeparateX :boolean

This flag allows you to disable the custom x separation that takes place by Physics.Arcade.separate. Used in combination with your own collision processHandler you can create whatever type of collision response you need. Use a custom separation system or the built-in one?

Source - physics/arcade/Body.js, line 244

customSeparateY :boolean

This flag allows you to disable the custom y separation that takes place by Physics.Arcade.separate. Used in combination with your own collision processHandler you can create whatever type of collision response you need. Use a custom separation system or the built-in one?

Source - physics/arcade/Body.js, line 252

deltaMax :Phaser.Point

The Sprite position is updated based on the delta x/y values. You can set a cap on those (both +-) using deltaMax.

Source - physics/arcade/Body.js, line 136

dirty :boolean

If this Body in a preUpdate (true) or postUpdate (false) state?

Source - physics/arcade/Body.js, line 315

drag :Phaser.Point

The drag applied to the motion of the Body.

Source - physics/arcade/Body.js, line 146

embedded :boolean

If a body is overlapping with another body, but neither of them are moving (maybe they spawned on-top of each other?) this is set to true. Body embed value.

Source - physics/arcade/Body.js, line 270

enable :boolean

A disabled body won't be checked for any form of collision or overlap or have its pre/post updates run.

Default Value:

• true

Source - physics/arcade/Body.js, line 36

facing :number

A const reference to the direction the Body is traveling or facing.

Source - physics/arcade/Body.js, line 221

friction :Phaser.Point

The amount of movement that will occur if another object 'rides' this one.

Source - physics/arcade/Body.js, line 173

game :Phaser.Game

Local reference to game.

Source - physics/arcade/Body.js, line 25

gravity :Phaser.Point

A local gravity applied to this Body. If non-zero this over rides any world gravity, unless Body.allowGravity is set to false.

Source - physics/arcade/Body.js, line 157

<readonly> halfHeight :number

The calculated height / 2 of the physics body.

Source - physics/arcade/Body.js, line 114

<readonly> halfWidth :number

The calculated width / 2 of the physics body.

Source - physics/arcade/Body.js, line 108

<readonly> height :number

The calculated height of the physics body.

Source - physics/arcade/Body.js, line 84

immovable :boolean

An immovable Body will not receive any impacts from other bodies.

Source - physics/arcade/Body.js, line 227

mass :number

The mass of the Body. When two bodies collide their mass is used in the calculation to determine the exchange of velocity.

Default Value:

• 1

Source - physics/arcade/Body.js, line 203

maxAngular :number

The maximum angular velocity in radians per second that the Body can reach.

Default Value:

• 1000

Source - physics/arcade/Body.js, line 197

maxVelocity :Phaser.Point

The maximum velocity in pixels per second sq. that the Body can reach.

Source - physics/arcade/Body.js, line 168

moves :boolean

If you have a Body that is being moved around the world via a tween or a Group motion, but its local x/y position never actually changes, then you should set Body.moves = false. Otherwise it will most likely fly off the screen. If you want the physics system to move the body around, then set moves to true. Set to true to allow the Physics system to move this Body, otherwise false to move it manually.

Default Value:

• true

Source - physics/arcade/Body.js, line 236

<readonly> newVelocity :Phaser.Point

The new velocity. Calculated during the Body.preUpdate and applied to its position.

Source - physics/arcade/Body.js, line 131

offset :Phaser.Point

The offset of the Physics Body from the Sprite x/y position.

Source - physics/arcade/Body.js, line 41

overlapX :number

When this body collides with another, the amount of overlap is stored here. The amount of horizontal overlap during the collision.

Source - physics/arcade/Body.js, line 258

overlapY :number

When this body collides with another, the amount of overlap is stored here. The amount of vertical overlap during the collision.

Source - physics/arcade/Body.js, line 264

<readonly> position :Phaser.Point

The position of the physics body.

Source - physics/arcade/Body.js, line 47

<readonly> preRotation :number

The previous rotation of the physics body.

Source - physics/arcade/Body.js, line 72

<readonly> prev :Phaser.Point

The previous position of the physics body.

Source - physics/arcade/Body.js, line 53

<readonly> right :number

The right value of this Body (same as Body.x + Body.width)

Source - physics/arcade/Body.js, line 794

rotation :number

An Arcade Physics Body can have angularVelocity and angularAcceleration. Please understand that the collision Body itself never rotates, it is always axis-aligned. However these values are passed up to the parent Sprite and updates its rotation.

Source - physics/arcade/Body.js, line 66

skipQuadTree :boolean

If true and you collide this Sprite against a Group, it will disable the collision check from using a QuadTree.

Source - physics/arcade/Body.js, line 320

<readonly> sourceHeight :number

The un-scaled original size.

Source - physics/arcade/Body.js, line 96

<readonly> sourceWidth :number

The un-scaled original size.

Source - physics/arcade/Body.js, line 90

<readonly> speed :number

The speed of the Body as calculated by its velocity.

Source - physics/arcade/Body.js, line 215

sprite :Phaser.Sprite

Reference to the parent Sprite.

Source - physics/arcade/Body.js, line 20

syncBounds :boolean

If true the Body will check itself against the Sprite.getBounds() dimensions and adjust its width and height accordingly. If false it will compare its dimensions against the Sprite scale instead, and adjust its width height if the scale has changed. Typically you would need to enable syncBounds if your sprite is the child of a responsive display object such as a FlexLayer, or in any situation where the Sprite scale doesn't change, but its parents scale is effecting the dimensions regardless.

Source - physics/arcade/Body.js, line 330

tilePadding :Phaser.Point

If this is an especially small or fast moving object then it can sometimes skip over tilemap collisions if it moves through a tile in a step. Set this padding value to add extra padding to its bounds. tilePadding.x applied to its width, y to its height. Extra padding to be added to this sprite's dimensions when checking for tile collision.

Source - physics/arcade/Body.js, line 310

touching :object

This object is populated with boolean values when the Body collides with another. touching.up = true means the collision happened to the top of this Body for example. An object containing touching results.

Source - physics/arcade/Body.js, line 290

type :number

The type of physics system this body belongs to.

Source - physics/arcade/Body.js, line 30

velocity :Phaser.Point

The velocity, or rate of change in speed of the Body. Measured in pixels per second.

Source - physics/arcade/Body.js, line 125

wasTouching :object

This object is populated with previous touching values from the bodies previous collision. An object containing previous touching results.

Source - physics/arcade/Body.js, line 296

<readonly> width :number

The calculated width of the physics body.

Source - physics/arcade/Body.js, line 78

x :number

The x position.

Source - physics/arcade/Body.js, line 807

y :number

The y position.

Source - physics/arcade/Body.js, line 824

Methods

<internal> checkWorldBounds()

Internal method.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - physics/arcade/Body.js, line 587

deltaAbsX() → {number}

Returns the absolute delta x value.

Returns:

number -

The absolute delta value.

Source - physics/arcade/Body.js, line 729

deltaAbsY() → {number}

Returns the absolute delta y value.

Returns:

number -

The absolute delta value.

Source - physics/arcade/Body.js, line 739

deltaX() → {number}

Returns the delta x value. The difference between Body.x now and in the previous step.

Returns:

number -

The delta value. Positive if the motion was to the right, negative if to the left.

Source - physics/arcade/Body.js, line 749

deltaY() → {number}

Returns the delta y value. The difference between Body.y now and in the previous step.

Returns:

number -

The delta value. Positive if the motion was downwards, negative if upwards.

Source - physics/arcade/Body.js, line 759

deltaZ() → {number}

Returns the delta z value. The difference between Body.rotation now and in the previous step.

Returns:

number -

The delta value. Positive if the motion was clockwise, negative if anti-clockwise.

Source - physics/arcade/Body.js, line 769

destroy()

Removes this bodys reference to its parent sprite, freeing it up for gc.

Source - physics/arcade/Body.js, line 570

hitTest(x, y) → {boolean}

Tests if a world point lies within this Body.

Parameters:

Name	Type	Description
x	number	The world x coordinate to test.
y	number	The world y coordinate to test.

Returns:

boolean -

True if the given coordinates are inside this Body, otherwise false.

Source - physics/arcade/Body.js, line 687

onFloor() → {boolean}

Returns true if the bottom of this Body is in contact with either the world bounds or a tile.

Returns:

boolean -

True if in contact with either the world bounds or a tile.

Source - physics/arcade/Body.js, line 699

onTop() → {boolean}

Returns true if the top of this Body is in contact with either the world bounds or a tile.

Returns:

boolean -

True if in contact with either the world bounds or a tile.

Source - physics/arcade/Body.js, line 709

onWall() → {boolean}

Returns true if either side of this Body is in contact with either the world bounds or a tile.

Returns:

boolean -

True if in contact with either the world bounds or a tile.

Source - physics/arcade/Body.js, line 719

<internal> postUpdate()

Internal method.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - physics/arcade/Body.js, line 490

<internal> preUpdate()

Internal method.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - physics/arcade/Body.js, line 410

render(context, body, color, filled)

Render Sprite Body.

Parameters:

Name	Type	Argument	Default	Description
context	object			The context to render to.
body	Phaser.Physics.Arcade.Body			The Body to render the info of.
color	string	<optional>	'rgba(0,255,0,0.4)'	color of the debug info to be rendered. (format is css color string).
filled	boolean	<optional>	true	Render the objected as a filled (default, true) or a stroked (false)

Source - physics/arcade/Body.js, line 842

renderBodyInfo(body, x, y, color)

Render Sprite Body Physics Data as text.

Parameters:

Name	Type	Argument	Default	Description
body	Phaser.Physics.Arcade.Body			The Body to render the info of.
x	number			X position of the debug info to be rendered.
y	number			Y position of the debug info to be rendered.
color	string	<optional>	'rgb(255,255,255)'	color of the debug info to be rendered. (format is css color string).

Source - physics/arcade/Body.js, line 870

reset(x, y)

Resets all Body values (velocity, acceleration, rotation, etc)

Parameters:

Name	Type	Description
x	number	The new x position of the Body.
y	number	The new y position of the Body.

Source - physics/arcade/Body.js, line 655

setSize(width, height, offsetX, offsetY)

You can modify the size of the physics Body to be any dimension you need. So it could be smaller or larger than the parent Sprite. You can also control the x and y offset, which is the position of the Body relative to the top-left of the Sprite.

Parameters:

Name	Type	Argument	Description
width	number		The width of the Body.
height	number		The height of the Body.
offsetX	number	<optional>	The X offset of the Body from the Sprite position.
offsetY	number	<optional>	The Y offset of the Body from the Sprite position.

Source - physics/arcade/Body.js, line 627

<internal> updateBounds()

Internal method.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - physics/arcade/Body.js, line 366